A free directory of real Christmas light installers Every listing checked on the installer's own website Listed alphabetically - not a ranking The season is short - ask for quotes early Installers: your free listing may already be live

Home/Christmas light installation cost

Cost guide · 2026 season

Christmas light installation cost

What homeowners pay to have outdoor Christmas lights put up, by home size, by foot and by job – from two national cost guides, with the dates they were updated.

Every figure dated and sourced
The short answer. Angi puts the national average at $444, with most homeowners paying $220 to $684 (updated May 2026). A simple roofline runs $250 to $1,500 and a full display with windows, trees and bushes $750 to $5,000 – the two guides below agree on both ranges.

Cost by home size

The bigger the house, the more roofline there is to light and the higher the ladder work. Angi groups it like this:

HomeRooflineAverageTypical range
Small, one story100–150 ft$250$200–$450
Medium, two story150–250 ft$450$350–$800
Large, three story250–400 ft$900$700–$1,500
Estate or custom400+ ft$1,200$1,000–$2,500

Source: Angi, updated May 3, 2026. National figures.

Cost per linear foot

Installers usually quote by the foot of roofline. The two guides disagree here: Angi reports $2 to $5 per foot, HomeGuide $5 to $12. Our reading is that the gap is the spread between a plain roofline with basic lights and a fully serviced display with commercial-grade bulbs, maintenance and takedown included. HomeGuide's table by footage:

Lit footageInstalled cost
50 ft$250–$600
100 ft$500–$1,200
150 ft$750–$1,800
200 ft$1,000–$2,400
250 ft$1,300–$3,000
300 ft$1,500–$3,600
400 ft$2,000–$4,800

Source: HomeGuide, updated October 1, 2025.

Not sure how much roofline you have? The roofline estimator on our homepage gives a rough footage for one, two and three story homes.

Cost by type of job

JobTypical costSource
Roofline only$250–$1,500Angi, HomeGuide
Full package: roofline, windows, doors, trees, bushes$750–$5,000Angi, HomeGuide
Custom or animated display$1,000–$8,000Angi
Takedown only$100–$400HomeGuide
Permanent LED lighting, 100–200 ft$2,000–$8,000HomeGuide
Minimum charge per job$150–$300Angi
Hourly labor, where charged$60–$100 an hourAngi

Businesses and HOAs are quoted site by site – see commercial Christmas light installation.

What the price usually includes

A professional season normally covers more than hanging the lights. Most quotes bundle some or all of:

  • Design – a walk-around or photo mock-up of what goes where.
  • The lights – often commercial-grade LEDs supplied on a lease, cut to fit your roofline.
  • Installation with clips, so nothing is nailed or stapled into shingles or gutters.
  • Service calls if a strand goes out during the season.
  • Takedown after the holidays, and storage until next fall.

When we checked the websites of the 1210 installers in this directory, 524 mentioned takedown and 377 mentioned storage. Ask each installer you contact which of these are in the price and which cost extra.

What makes a quote higher or lower

  • Footage. The single biggest driver. More roofline, more lights, more labor.
  • Height and roof pitch. Two and three story homes and steep roofs take longer and need more safety gear.
  • Bulb type. Large C9 bulbs on the roofline cost more per foot than mini lights; wrapping tree trunks and canopies is priced separately.
  • Lease or buy. Leased lights keep the first-year price down; buying costs more up front.
  • Design. Colour changes, animation and extra elements such as wreaths and garland add cost.
  • When you book. Installers fill their calendars through October and November, and many have a minimum charge – $150 to $300 according to Angi.

Running costs

Electricity is a small part of the bill with LEDs. Angi estimates an incandescent display at $30 to $75 a month to run, and the LED equivalent at $5 to $20. Replacement strands run about $20 to $50 each (Angi).

Doing it yourself instead

You save the labor but take on the ladder work, the storage and the electrics. If you go that way, use lights rated for outdoor use and follow the CPSC's rule of thumb: never string together more than three sets of incandescent lights, and never overload an outlet. Our guide to hiring an installer covers what to ask if you decide to hand it over.

Sources

All figures are national. Your price depends on your home, your design and your area – get two or three written quotes.

Questions

Christmas light installation cost FAQ

How much does Christmas light installation cost?

Angi puts the national average at $444, with most homeowners paying $220 to $684 (updated May 2026). A basic roofline runs $250 to $1,500 and a full package with windows, trees and bushes $750 to $5,000, according to both Angi and HomeGuide.

How much do installers charge per foot?

Angi reports $2 to $5 per linear foot and HomeGuide $5 to $12 (updated October 2025). Permanent lighting is priced differently, at $20 to $40 per foot installed (HomeGuide).

Is takedown included in the price?

Often, but not always. When we checked installers' websites, 524 of the 1210 in this directory mentioned takedown and 377 mentioned storage. If you only need lights taken down, HomeGuide puts removal alone at $100 to $400.

Is it cheaper to buy the lights or lease them?

Many installers supply the lights on a lease: you pay each season, they own, store and replace them. Buying costs more the first year but you keep the lights. Ask for the quote both ways and compare over three seasons.

Are permanent lights cheaper in the long run?

They cost more up front – $2,000 to $8,000 for 100 to 200 feet (HomeGuide) – but there is no yearly install. On HomeGuide's figures the gap closes after roughly two to eight seasons. See the permanent lights guide.

The directory

Compare real quotes near you

1210 installers in 49 states, each checked on its own website. Pick your state, then your city.

Free quotes

Get Christmas light installation quotes

Tell us your city and roughly what you want lit. We pass it to installers who serve your area.

This field is for validation purposes and should be left unchanged.
So the installer can reach you. We do not use it for anything else.
Anything unusual about the house, or a look you have in mind. Optional.